Nuacht Comhpháirteanna Leictreonacha

Microchip Technology EVB-LAN7800LC-1 USB Type-C™ Dongle is designed for evaluation of the LAN7800, a USB 3.1 Gen 1 Gigabit Ethernet Controller on a 4-layer RoHS-compliant Printed Circuit Board (PCB).

Microchip Technology AC320004-7 - KSZ8863 Ethernet PHY Daughter Board is designed for Ethernet communication with a variety of Microchip starter kits.

PulseLarsen External Active Navigation Antennas offer a 1170 to 1610MHz frequency range, a 3 to 5VDC power input, and <15mA current consumption rating.

PulseLarsen Antenna GPS and GLONASS Antenna Patches include the W3224, W3223, and W3208 ceramic patches.

PulseLarsen 4G and 5G Antennas operate from a 617 to 3900MHz frequency range and have up to 70% efficiency.

SensiEDGE SensiBLE 2.0 System on Module provides low power consumption in a compact, cost-effective solution.

EPCOS / TDK Mini Lateral PowerHap Piezo Actuators are miniature rectangular piezo actuators for haptic feedback.

Molex Easy-On FFC/FPC Pitch Vertical Connectors offer a 0.50mm pitch and 36 circuits while a wide pick-and-place area provides a vacuum space for an SMT nozzle.

Sanyo Denki San Ace 97W 9W1B Type Splash Proof Blower features a 12 or 24V max. voltage rating, a 0.07 to 1.3A current range, and a 15.6W input rating.

Arduino MKR ENV Sheild is a platform that allows any Arduino derived MKR board to acquire environmental data through an array of latest generation sensors.

Arduino MKR Motor Carrier Board is an add-on MKR board designed to control servo, DC, and stepper motors.

Bourns®  CVH160808 Multilayer Power Chip Inductors are developed with ferrite based core material that offers low magnetic radiation and high current in a small package.

Bourns® CVH201610A Multilayer Power Chip Inductors are developed with ferrite based core material and shielded construction with AEC-Q200 standard compliance.

Bourns® Multilayer Power Chip Inductors adopt advanced multilayer technology to achieve its low profile and provide sufficient current handling capability.

Bourns® CVH201205 Multilayer Power Chip Inductors are produced with ferrite based core material that offers low magnetic radiation, high current, and small size.

DFRobot PYNQ-Z2 Development Board is based on the Xilinx Zynq XC7Z020 System on Chip (SoC), and is designed to support PYNQ, an open-source embedded development framework.

DFRobot FIT0552 Streaming Cable enables the LattePanda Alpha and Delta Single Board Computers (SBCs) to run on a PC in Picture in Picture (PiP) mode.

ICE Components CT10 Current Sense Transformers are optimized for frequencies from 10kHz to 400kHz with full selections of turns ratios.

ICE Components GT07 Gate Drive Transformers feature 9.2mm creepage and 8mm clearance and are optimized for frequencies from 50kHz to 1MHz.

ICE Components GT17 Gate Drive Transformers feature an operating frequency of 420kHz with 9.2mm creepage and 8mm clearance.