TDK CNC Multilayer Ceramic Chip Capacitors
TDK CNC Multilayer Ceramic Chip Capacitors feature a ±10% tolerance rating, a 16 to 100VDC voltage range, and -55°C to +125°C temperature range. The CNC series offers a lower electric resistance because the current can pass through low resistive layers by covering soldering positions with conductive resin layers. TDK CNC Multilayer Ceramic Chip Capacitors are ideal for battery line fail-safe designs and the prevention of ceramic body cracks by board bending.
Features
±10% tolerance rating16 to 100VDC voltage rangeLower electric resistantContributes to reliability improvement
Applications
Fail-safe design in battery linePrevention of ceramic body cracks by board bending
Tdk Newest
TDK TSP15 Piezoelectric Powder Level Sensor is designed for detecting powder in copiers, laser printers, and more by utilizing a piezoelectric ceramic sensor element.
Date: 2019-09-23TDK CNC Multilayer Ceramic Chip Capacitors feature a ±10% tolerance rating, a 16 to 100VDC voltage range, and -55°C to +125°C temperature range.
Date: 2019-09-20TDK InvenSense ICS-41351 Digital Multi-Mode Microphone features a MEMS microphone element, an impedance converter amplifier, and a fourth-order Σ-Δ modulator.
Date: 2019-09-04TDK InvenSense ICS-40740 Ultra-Low Noise Microphones feature ultra-low noise, high dynamic range, differential analog output, and a bottom port.
Date: 2019-08-19TDK InvenSense IAM-20381 3-Axis MotionTracking Accelerometer offer on-chip 16-bit ADCs, a 1.71 to 3.6VDD voltage range, and I2C and SPI serial interfaces.
Date: 2019-07-22TDK InvenSense IAM-20380 High Performance Gyroscope offers a 0.5 to 4VDD voltage range, a 400kHz clock frequency, and -40°C to +85°C operating temperature range.
Date: 2019-07-22TDK InvenSense IAM-20680 6-Axis MotionTracking Device combines a 3-axis gyroscope and a 3-axis accelerometer in a small 3x3x0.75mm package.
Date: 2019-06-24TDK PiezoListen™ Ultra-Thin Piezo Speakers are high-power actuators that convert virtually any surface into a speaker without compromising the existing structural design.
Date: 2019-06-10